สินค้า

test

test
รหัส :
ราคา 0.00 บาท
- +

แท็ก:

26 สิงหาคม 2562

ผู้ชม 330 ผู้ชม

Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your processes, these furnaces can be extended with extras from our extensive option list.

  • Tmax 1600°C, 1750°C, or 1800°C
  • Recommended working temperature 1750°C (for models HT ../18), increased wear and tear must be expected in case of working at higher temperatures
  • Dual shell housing with fan cooling for low shell temperatures
  • Heating from both sides via molybdenum disilicide heating elements
  • High-quality fiber insulation backed by special insulation
  • Side insulation constructed with tongue and groove blocks provides for low heat loss to the outside
  • Long-life roof insulation with special suspension
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • Chain-guided parallel swivel door for defined opening and closing of the door
  • Two-door design (front/back) for high-temperature furnaces > HT 276/..
  • Labyrinth sealing ensures the least possible temperature loss in the door area
  • Reinforced floor as protection for bottom insulation as standard from models HT 16/16 upwards
  • Vapor vent in the furnace roof
  • Heating elements switched via thyristors
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

  • Uncontrolled or controlled cooling system with frequency-controlled cooling fan and motor-driven exhaust air flap
  • Furnace in DB design featuring fresh air preheating, exhaust gas ventilation and an extensive safety package for debinding and sintering in one process, i. e. without transfering the material from the debinding furnace to the sintering furnace
  • Stainless steel exhaust gas top hats
  • Special heating elements for zirconia sintering provide for longer service life with respect to chemical interaction between charge and heating elements
  • Protective gas connection to purge with non-flammable protective or reaction gases
  • Manual or automatic gas supply system
  • Inner process box to improve the gas tightness and to protect the furnace chamber against contamination
  • Lift door
  • Motorized exhaust air flap, switchable via the program
  • Thermal or catalytic exhaust cleaning systems
  • Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control
Model Tmax Inner dimensions in mm Volume Outer dimensions2 in mm Connected Electrical Weight
  °C w d h in l W D H load kW connection* in kg
HT 04/16 1600 150 150 150 4 730 490 1400 5.2 3-phase1 150
HT 08/16 1600 150 300 150 8 730 640 1400 8.0 3-phase1 200
HT 16/16 1600 200 300 260 16 810 700 1500 12.0 3-phase1 270
HT 40/16 1600 300 350 350 40 1000 800 1620 12.0 3-phase 380
HT 64/16 1600 400 400 400 64 1130 900 1670 18.0 3-phase 550
HT 128/16 1600 400 800 400 128 1130 1290 1670 26.0 3-phase 750
HT 160/16 1600 500 550 550 160 1250 1050 1900 21.0 3-phase 800
HT 276/16 1600 500 1000 550 276 1300 1600 1900 36.0 3-phase 1100
HT 450/16 1600 500 1150 780 450 1350 1740 2120 64.0 3-phase 1500
                       
HT 04/17 1750 150 150 150 4 730 490 1400 5.2 3-phase1 150
HT 08/17 1750 150 300 150 8 730 640 1400 8.0 3-phase1 200
HT 16/17 1750 200 300 260 16 810 700 1500 12.0 3-phase1 270
HT 40/17 1750 300 350 350 40 1000 800 1620 12.0 3-phase 380
HT 64/17 1750 400 400 400 64 1130 900 1670 18.0 3-phase 550
HT 128/17 1750 400 800 400 128 1130 1290 1670 26.0 3-phase 750
HT 160/17 1750 500 550 550 160 1250 1050 1900 21.0 3-phase 800
HT 276/17 1750 500 1000 550 276 1300 1600 1900 36.0 3-phase 1100
HT 450/17 1750 500 1150 780 450 1350 1740 2120 64.0 3-phase 1500
                       
HT 04/18 1800 150 150 150 4 730 490 1400 5.2 3-phase1 150
HT 08/18 1800 150 300 150 8 730 640 1400 8.0 3-phase1 200
HT 16/18 1800 200 300 260 16 810 700 1500 12.0 3-phase1 270
HT 40/18 1800 300 350 350 40 1000 800 1620 12.0 3-phase 380
HT 64/18 1800 400 400 400 64 1130 900 1670 18.0 3-phase 550
HT 128/18 1800 400 800 400 128 1130 1290 1670 26.0 3-phase 750
HT 160/18 1800 500 550 550 160 1250 1050 1900 21.0 3-phase 800
HT 276/18 1800 500 1000 550 276 1300 1600 1900 42.0 3-phase 1100
HT 450/18 1800 500 1150 780 450 1350 1740 2120 64.0 3-phase 1500
1Heating only between two phases *Please see page 73 for more information about supply voltage
2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.

 

 Product Brochure 
&l
Engine by shopup.com